2006 H&H ATV 8 x 12

Additional Specifications:

• Design: Tandem axle 4-wheeler trailer
• Frame: 8 ft. x 12 ft. flatbed 4-wheeler trailer - heavy frame with 4-wheeler ramps / side rails
• Coupler: 2 in. A-frame Posi-lock 5,000 lb. rated
• Jack: 2,000 lb. swivel-up jack
• Safety Chains: Dual plated models with ‘S’ hooks
• Wiring: PVC sleeved multi-strand copper core wiring with 4-prong flat trailer plug
• Suspension: Spring mounted axle, no brakes
• Fenders: Fender for single axle
• Ramps: Standard 5 ft. long, 2 in. channel steel car ramps
• Gate: 8 ft. rear ramp gate - standard 4 ft. tall for 76 in. wide deck

Options

• Whether you are serious about 4-wheeling or if you just bought a new 4-wheeler and can't seem to get it to fit in the back of your SUV then H & H's 4-wheeler trailer is perfect for you!
• Constructed from 4 x 3 x 1/4 in. angle steel this heavy duty trailer frame can take whatever you can dish out. Just like all of our other flatbed models this trailer's 4 in. channel steel tongue is welded all the way back to the front of the suspension for added strength!
• Keeping our new 4-wheeler trailer rolling is the same idler axle and the same wheels and tires that you are accustomed to seeing on our other flatbed trailers. It features a 3,500 lb. idler axle (2,990 lb. GVWR rating) with ST205-15 trailer rated tires on 15 in. white spoke wheels.
• If you look closely you can see the trailer ramps that are attached to each side of the trailer. When in place they make great side rails to help keep your 4-wheeler secure on the trailer.
• Once you get to where you are going to ride simply remove the ramps from the side of the trailer, put them in place, and you are ready to unload (or load) your 4-wheeler. Those are the same ramps that are used on our heavy duty flatbed trailers so they will provide a lifetime of reliable service. No wimpy ramps here! Our 5 ft. long ramps are made with 2 in. channel steel, and will handily take anything you can throw at them.
• Our new 4-wheeler trailer lets you load, and in this case unload, the front 4-wheeler without touching with the rear one. That is a very handy feature to have if you never know which 4-wheeler you are going to ride first.
• Since the ramps are not fixed they can be set to accommodate the width of any 4-wheeler model and are extremely sturdy to ensure safe loading and unloading. You can also load and unload your front 4-wheeler on the left side of the trailer too!
• The steel mesh ramp gate folds down to make unloading and loading your rear 4-wheeler a piece of cake. The spring loaded ramp gate storage hooks allow you to latch and unlatch the gate without removing a single clip or pin. Nothing to remove means nothing to lose and that is a very good thing! The ramp gate is the H & H exclusive fold flat design, which allows you to lay the gate flat on the floor of the trailer while towing empty, to all but eliminate wind drag.
• You can also choose to leave the rear ramp gate off and save yourself some money. H & H will install a standard ramp hook bar in its place. You will then be able to use the same ramps for both 4-wheelers on the trailer.
• Once at your destination, you will be racing around on your 4-wheelers in a matter of seconds. Less hassle and fewer things to worry about means that you will be able to spend more time enjoying yourself. What else would you expect from an H & H trailer? We pride ourselves on providing customers with easy to use, hassle free, long lasting, reliable trailers!
• The H & H ATV Trailer is available in deck widths of 76 in. and 82 in., with lengths of 12 and 14 ft.